With the development of the economy, the hotel industry is also booming and the hotel styles are gradually diversifying. In the design of hotel furniture material, the structure needs to consider the following five points. In the hotel furniture for guest room furniture targeted material structure design, you can focus on the following aspects.

Here is the content:

l Appearance quality

l Structural strength

l Material cost

l Transportation and installation

l Safety performance

Appearance quality

The quality of the appearance of hotel furniture first requires a flat furniture countertop, fine workmanship, fine decoration, clear and beautiful texture. Different base materials and veneer materials have different material properties, and not paying attention to the characteristics of the material and the correct use of the method often leads to warping of the board. The structural properties of the back and the front side of the laminate must be the same or similar, the moisture content of the base material is generally required to be 6~10%, and the material selected should be the same batch as far as possible.

Structural strength

Guest room furniture is mostly fixed hotel furniture, the general structure of the panel-based, the choice of wood screws, hardware connectors, and adhesives as a way to join. In the use of materials should pay attention to different material characteristics, such as particleboard, MDF poor grip nail strength, avoid using in the need for frequent activities or the need for strong grip nail parts, such as door hinge screw parts, draw rail bottom rail screw parts. Bed screen, mirror frame wall hardware hanging parts should pay special attention or use wood instead of reinforcement, nowadays the popular wood square 45 degrees upside-down structure.

Material cost

The same to meet the requirements of the use of the case as far as possible to use low-cost materials, in the use of large surface materials at the same time pay attention to the use of the same kind of small pieces of material, comprehensive to improve the utilization rate of the plate. Guest room hotel furniture is generally large in quantity, try to use the computer to reasonably arrange the material, large block material and small block material comprehensive use, reduce the material cost. Different structures, pay attention to the comparison of material costs.

Transportation and installation

Hotel floors are generally high, requiring lightweight hotel furniture to facilitate transportation. In particular, some one-piece bed back, some extended writing desk, the elevator can not be transported, the freight elevator has generally been removed during the installation of furniture, how to safely transport, from the weight of the material and structure requires special consideration.

Safety performance

General hotels do not have a clear formaldehyde-free amount of regulations, but there are furniture fire requirements in the hotel that allows certain parts of the hotel can use fire-resistant panels, anti-scald paint, flame retardant fabrics, etc. High-end hotels even require the production of hotel furniture wood after fire treatment.

These aspects of the above factors need to be considered in the practical application of cross-use. And Hyman Hospitality tries to make the production of guest room hotel furniture both to meet the hotel requirements, but also efficient production, reduce costs, the use of specialized processing technology, processing equipment so that the production of hotel furniture is in line with the upscale hotel people-oriented comfort requirements.