SPEC NO: CG-304

DESCRIPTION: Sofa Sleeper with Pillows For One Bedroom Units

MODEL NO: Custom

DIMENSIONS: 74"W x 36"D x 34"H; 91 1/2" OD

CONTENT: Hardwood Frame, High Density Foam, Metal Tubing

ESTIMATED YARDAGE: 14 COM

FINISH/COLOR: Blackened Iron Powdercoat

SLEEPER SOFA: 60" Standard Full Sleeper Mechanism with 52" Mattress

Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification  Guidelines and as follows:

• Product to the have following: removable seat and back cushions. 

• Removable covers. Fabricate with double rolled French seams and  concealed Teflon coated or nylon zipper. 

• Upholstery, foam, batting, padding, and/or dacron wrap must meet all  state and local flammability requirements for property location. Must at  minimum meet CAL117. 

• Fully upholstered frames to be constructed of select hardwoods and  hardwood plywood. Exposed wood frames to be constructed of maple  and beech hardwoods. 1-1/4” hardwood frames to be assembled using  double dowels, screws, glue, and corner blocks. Plywood frames to be  assembled using interlocking joints, screws, glue and staples. All metal  parts of interior hardware must be non-corrosive, guaranteed against  rust & corrosion, suitable for use in varying climatic conditions. 

• Powder coat baked enamel. All welds must be filled and ground smooth. 

• Refer to CG-304.1 for fabric for sofa. 

• Manufacturer must verify all fabric quantity requirements. 

• Show all pieces in shop drawings. 

• To be of contract quality and suitable for commercial use. 

• Manufacturer to provide nylon carpet glides. 

• All materials and methods of construction must comply with local fire  and life safety codes for use in hotels and other public spaces. 

• Refer to drawings for location. 

• Ensure that unit will fit in elevators and through doors prior to  fabrication. 

• Manufacturer to clearly mark each carton with item ID and specification  number.