SPEC NO: CG-302

DESCRIPTION: Dining Stool At Kitchens in Accessible One Bedroom Units

MODEL NO: Custom

DIMENSIONS: 20"W x 23"D x 35.5"OH, 22"SH

ESTIMATED YARDAGE: 1.5 COM

FINISH/COLOR: Stained to Match Wilsonart Palisades Oak 7987-12

Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification  Guidelines and as follows:

• Upholstery, foam, batting, padding, and/or dacron wrap must meet all  state and local flammability requirements for property location. Must at  minimum meet NFPA 260/CAL117. 

• Fully upholstered frames to be constructed of select hardwoods and  hardwood plywood. Exposed wood frames to be constructed of maple  and beech hardwoods. Hardwood frames to be assembled using double  dowels, screws, glue, and corner blocks. Plywood frames to be  assembled using interlocking joints, screws, glue and staples. All metal  parts of interior hardware must be non-corrosive, guaranteed against  rust & corrosion, suitable for use in varying climatic conditions. 

• Refer to CG-302.1 for chair fabric. 

• Manufacturer must verify all fabric quantity requirements. 

• Manufacturer to provide nylon carpet glides. 

• To be of contract quality and suitable for commercial use. 

• All materials and methods of construction must comply with local fire  and life safety codes for use in hotels and other public spaces. 

• Refer to drawings for location. 

• Manufacturer to clearly mark each carton with item ID and specification  number.

• Ensure that piece will fit in elevators and through doors prior to  commencing fabrication. 

• Manufacturer to clearly mark each carton with item ID and specification  number