After the bathroom renovation, we can install bathroom cabinets and other sanitary ware, bathroom installation steps can usually be simply divided into four steps. The following is a small introduction to the specific step content.

Here is the content list:

• Installation of angle valve

• Cabinet assembly

• Install the basin

• Install the bathroom mirror

Installation of angle valve

Before the installation of bathroom cabinets, we need to install the hot and cold-water pipe angle valve. After the main water valve is turned off, we will clean the corner valve interface on the wall, then the corner valve connection wrapped with several layers of raw material tape, and then the corner valve will be rotated and screwed into the wall interface, and wrench twists the corner valve, the corner valve outlet position is adjusted.

Cabinet assembly

In the assembly of the cabinet, we look at the installation instructions, and check the various accessories of the product are not missing. Next, we assembled the cabinet according to the installation instructions. Bathroom cabinets are assembled from the bottom up, we need to first install the four corners of the bathroom cabinet, and then use the screws to install the bathroom cabinet base plate, laminate, side panels, etc., and finally use the hinges to install the bathroom cabinet door fixed. After the bathroom cabinet is installed, we will move it to the installation area.

Install the basin

We first put the basin in the bathroom cabinet installation holes, and use glass glue to fix the basin. Next, we install the faucet, we screw the hot and cold-water pipe on the faucet, then the faucet through the installation part of the countertop and then set the gasket, the nut will faucet fixed, and finally the other end of the faucet hot and cold-water pipe connected to the corner valve. Next, we install the downpipe, we first put the gasket into the countertop downpipe, then put the downpipe into the downpipe, then we put the gasket and screw buckle set on the downpipe to fix it, and finally, we connect one end of the downpipe to the downpipe and the other end on the ground downpipe.

Install the bathroom mirror

We first determine the installation height of the bathroom mirror and the installation position of the nails and mark the wall. Next, we use the drill-to-drill holes in the wall and the screws into the holes, screws need to reveal a part of the wall. Finally, we will mirror behind the fasteners against the nails to hang.

On the installation of bathroom cabinets is the correct steps, I will briefly introduce to you here. I hope that after reading this article, you can understand this. Bathroom cabinet assembly as far as possible to ask professionals to install, to avoid their installation errors, water leakage, and other problems. For more information, you can continue to pay attention to Hyman Hospitality Co., Ltd. Our company is known for its professional production and attentive service.