English
 |
| Quantity: | |
|---|---|
SPEC NO: CG-307
DESCRIPTION: Chair - at Desk for Rooms with LVT Throughout
MODEL NO: Custom
DIMENSIONS: 24-1/4" W x 26" D x 34-1/2" H, 19" SH
ESTIMATED YARDAGE: 2 Yards
FABRIC: Richloom Xander Navy
FINISH: Stained to Match Wilsonart Palisades Oak 7987-12
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. 1-1/4” hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions
• Manufacturer must verify all fabric quantity requirements.
• Manufacturer to provide nylon carpet glides.
• Show all pieces in shop drawings.
• To be of contract quality and suitable for commercial use.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces. • Refer to drawings for location
• Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number.
SPEC NO: CG-307
DESCRIPTION: Chair - at Desk for Rooms with LVT Throughout
MODEL NO: Custom
DIMENSIONS: 24-1/4" W x 26" D x 34-1/2" H, 19" SH
ESTIMATED YARDAGE: 2 Yards
FABRIC: Richloom Xander Navy
FINISH: Stained to Match Wilsonart Palisades Oak 7987-12
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. 1-1/4” hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions
• Manufacturer must verify all fabric quantity requirements.
• Manufacturer to provide nylon carpet glides.
• Show all pieces in shop drawings.
• To be of contract quality and suitable for commercial use.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces. • Refer to drawings for location
• Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number.
