English
 |
| Quantity: | |
|---|---|
SPEC NO: CG-304
DESCRIPTION: Sofa Sleeper with Pillows For One Bedroom Units
MODEL NO: Custom
DIMENSIONS: 74"W x 36"D x 34"H; 91 1/2" OD
CONTENT: Hardwood Frame, High Density Foam, Metal Tubing
ESTIMATED YARDAGE: 14 COM
FINISH/COLOR: Blackened Iron Powdercoat
SLEEPER SOFA: 60" Standard Full Sleeper Mechanism with 52" Mattress
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Product to the have following: removable seat and back cushions.
• Removable covers. Fabricate with double rolled French seams and concealed Teflon coated or nylon zipper.
• Upholstery, foam, batting, padding, and/or dacron wrap must meet all state and local flammability requirements for property location. Must at minimum meet CAL117.
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. 1-1/4” hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions.
• Powder coat baked enamel. All welds must be filled and ground smooth.
• Refer to CG-304.1 for fabric for sofa.
• Manufacturer must verify all fabric quantity requirements.
• Show all pieces in shop drawings.
• To be of contract quality and suitable for commercial use.
• Manufacturer to provide nylon carpet glides.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
• Refer to drawings for location.
• Ensure that unit will fit in elevators and through doors prior to fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number.
SPEC NO: CG-304
DESCRIPTION: Sofa Sleeper with Pillows For One Bedroom Units
MODEL NO: Custom
DIMENSIONS: 74"W x 36"D x 34"H; 91 1/2" OD
CONTENT: Hardwood Frame, High Density Foam, Metal Tubing
ESTIMATED YARDAGE: 14 COM
FINISH/COLOR: Blackened Iron Powdercoat
SLEEPER SOFA: 60" Standard Full Sleeper Mechanism with 52" Mattress
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Product to the have following: removable seat and back cushions.
• Removable covers. Fabricate with double rolled French seams and concealed Teflon coated or nylon zipper.
• Upholstery, foam, batting, padding, and/or dacron wrap must meet all state and local flammability requirements for property location. Must at minimum meet CAL117.
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. 1-1/4” hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions.
• Powder coat baked enamel. All welds must be filled and ground smooth.
• Refer to CG-304.1 for fabric for sofa.
• Manufacturer must verify all fabric quantity requirements.
• Show all pieces in shop drawings.
• To be of contract quality and suitable for commercial use.
• Manufacturer to provide nylon carpet glides.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
• Refer to drawings for location.
• Ensure that unit will fit in elevators and through doors prior to fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number.
