English
 |
| Quantity: | |
|---|---|
SPEC NO: CG-302
DESCRIPTION: Dining Stool At Kitchens in Accessible One Bedroom Units
MODEL NO: Custom
DIMENSIONS: 20"W x 23"D x 35.5"OH, 22"SH
ESTIMATED YARDAGE: 1.5 COM
FINISH/COLOR: Stained to Match Wilsonart Palisades Oak 7987-12
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Upholstery, foam, batting, padding, and/or dacron wrap must meet all state and local flammability requirements for property location. Must at minimum meet NFPA 260/CAL117.
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. Hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions.
• Refer to CG-302.1 for chair fabric.
• Manufacturer must verify all fabric quantity requirements.
• Manufacturer to provide nylon carpet glides.
• To be of contract quality and suitable for commercial use.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
• Refer to drawings for location.
• Manufacturer to clearly mark each carton with item ID and specification number.
• Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number
SPEC NO: CG-302
DESCRIPTION: Dining Stool At Kitchens in Accessible One Bedroom Units
MODEL NO: Custom
DIMENSIONS: 20"W x 23"D x 35.5"OH, 22"SH
ESTIMATED YARDAGE: 1.5 COM
FINISH/COLOR: Stained to Match Wilsonart Palisades Oak 7987-12
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
• Upholstery, foam, batting, padding, and/or dacron wrap must meet all state and local flammability requirements for property location. Must at minimum meet NFPA 260/CAL117.
• Fully upholstered frames to be constructed of select hardwoods and hardwood plywood. Exposed wood frames to be constructed of maple and beech hardwoods. Hardwood frames to be assembled using double dowels, screws, glue, and corner blocks. Plywood frames to be assembled using interlocking joints, screws, glue and staples. All metal parts of interior hardware must be non-corrosive, guaranteed against rust & corrosion, suitable for use in varying climatic conditions.
• Refer to CG-302.1 for chair fabric.
• Manufacturer must verify all fabric quantity requirements.
• Manufacturer to provide nylon carpet glides.
• To be of contract quality and suitable for commercial use.
• All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
• Refer to drawings for location.
• Manufacturer to clearly mark each carton with item ID and specification number.
• Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
• Manufacturer to clearly mark each carton with item ID and specification number
